Mechanical pencils Archives - Page 9 of 14

A Prototype! The Kaweco AL Sport Stonewashed Pencil

6 Comments / Kaweco, Mechanical pencils / 4 May 2016 / 0.7mm, AL Sport stonewashed, Kaweco, Made in Germany, Michael Gutberlet, prototype, push pencil

Kaweco’s AL Sport stonewashed series

Having used Kaweco’s AL Sport stonewashed fountain pen since 2014 I thought that a stonewashed pencil might look rather nice, too. Unfortunately, the ‘Stonewashed series’ only includes a fountain pen, a ballpen (that the official name) and a rollerball – no mechanical pencil (or push pencil, the name used by Kaweco).

No pencil

The ballpen and the push pencil look very similar, so I thought it might be possible to simply use the AL Sport pencil mechanism in the ballpen body, but that would mean having to buy the ballpen even though I wouldn’t use it – and it’s just guesswork that the parts would fit, so earlier this year, in February, I contacted Michael Gutberlet from Kaweco asking whether there is or will be a AL Sport stonewashed pencil. I had his contact details from an earlier email exchange in 2013, when Michael Marzani from Just Another Pen and I were discussing the brass body of the Kaweco Liliput he reviewed in his blog. As part of the discussion Michael Marzani contacted Michael Gurberlet, who was providing information about the brass he used for this pen.

Great balance: The centre of gravity is slightly towards the front

A prototype

To my surprise Michael Gutberlet then made a Prototype ^[1]A real prototype 8^) not like this year’s April Fools Day Prototype. Kaweco and Prototype, that reminds me of SBRE Brown’s blog post and video about the Kaweco Ranger, which, as far as I … Continue reading for me. I got the impression that the main issue when creating this pen was the push button, but since I don’t have an AL Sport ballpen I can’t really comment how much the ballpen and the pencil’s push button differ. I assume the top looks the same, but the button is different, probably because the pencil push button is held by the lead pipe, but the ballpen push button is on the click mechanism – but this is pure speculation. Michael Gutberlet seems to be very hands-on with the pens he creates, so as far as I know he made this prototype himself. He also finishes each Lilliput Fireblue fountain pen individually. Massdrop is currently selling them for $139.

In March 2016, when the pencil was ready, I was contacted by Sabine Götz – and she called it a prototype – how exciting! The word prototype hadn’t been mentioned before, so that was a very exciting moment. I guess this makes this pencil a one of a kind.

I also got a bill. The pencil was a bit more expensive than the AL Sport stonewashed fountain pen I bought a few years ago, but that was more down to the fact that I found a shop that sold it for a good price. I guess what I paid for the pencil is similar to what the official retail price for an AL Sport stonewashed pencil would be.

The pencil

Shape and lead

The pencil itself is quite stubby, but all Kaweco Sport push pencils are, so I knew what I was getting. Nevertheless, I think the stubbiness makes the pencil less elegant than the fountain pen version. The pencil takes 0.7 mm leads. According to the mini manual that came with the pen there seem to be versions of the Sport pencil in 0.5 mm, 0.7 mm, 0.9 mm and 2 mm, but I don’t think I ever saw the Sport in 0.5 mm.

Clip

I ordered a clip for the pencil so that I can transport it easily. Pen Heaven had the best price I could find in the UK, £1.99 (~$2.90; €2.50), including postage. I do use the pen with the clip, but that does make rotating the pen (and using the lead up from all sides) more difficult.

Material

The pen itself feels solid and feels like it’s mainly made from metals (mainly aluminium) or metal alloys (the mechanism?), but the lead pipe is made of clear, slightly flexible plastic. The push button gets stuck on this pipe (friction fit). There is no eraser in this pencil.

Kaweco AL Sport stonewashed pencil prototype — The plastic pipe for the leads

Lead

According to the manual you can store two leads in the pipe. You might think that, as with mechanical pencils from many decades ago, you can store leads in the space between the pipe and the body, but you would only be able to store leads with a length of about 2 cm there, so this space is more or less ‘wasted’.

By the way, my wife was very impressed by the lead the pencil came with. Her comments were: ‘creamy and buttery, soft, but does not smudge’. That is high praise coming from her as she doesn’t like leads that smudge …so the Lamy Scribble’s original leads had to go. Her dislike for smudgy leads goes so far that she is using H leads in a pencil that is used for an Atoma notebook (H is actually great with Atoma’s paper).

Numbers

A quick look at the dimensions of the pen:

It is hexagonal and has a diameter of 13 mm (just over half an inch) – much wider than most mechanical and wood cased pencil. For comparison: the current Noris has a diameter of 6.8 mm. The pens length is 10.8 cm and it has a weight of 29 g (just over one ounce).

This blog post has been brought to you by Kryten and the Jupiter Mining Corporation: If you don't gosub a programme loop you never get a subroutine — This blog post has been brought to you by Kryten and the Jupiter Mining Corporation – Kryten’s wide words: If you don’t gosub a programme loop you never get a subroutine

Daily use and overall verdict

I have used this pencil for a while now, together with the AL Sport stonewashed fountain pen. Together they are such a nice pair. I have to say that I always preferred using the pencil, despite its stubiness. I find the pencil’s look much less attractive than the stonewashed fountain pen’s elegance, but because it is instantly ready it was my pen of choice – there is no cap that needs to be taken off and posted first.

Overall this is a great pencil, even though I would prefer a slimmer, longer version. I wonder whether this stonewashed pencil (not my imaginary slimmer, longer version) will be available in shops in the future. I guess the original problem was that different pen parts need ‘stonewashing’ for different lengths of time, but now that there is a prototype (and a recipe how long its parts need ‘stonewashing’) it should be easier to make more stonewashed pencils.

Regarding the stonewashing: I have to add that my fountain pen has a better stonewashed effect, but this might be caused by the different shape of the parts (or, less likely, the different paint). The question now is whether Kaweco sells enough pencils to think it’s worth offering an AL Sport stonewashed pencil.

There's an old android saying which has particular relevance here: If you don't gosub a programme loop you never get a subroutine (Kryten/Red Dwarf) — Magnified from the previous photo: The AL Sport in action

Price: March / April 2016

Exchange rates: May 2016

I would like to thank Michael Gutberlet for making this prototype for me.

Dries has a review of the RAW version of this pencil.

The Massdrop link contains a friend invitation code.

References[+]

References
↑1	A real prototype 8^) not like this year’s April Fools Day Prototype. Kaweco and Prototype, that reminds me of SBRE Brown’s blog post and video about the Kaweco Ranger, which, as far as I know, is not a prototype, but one of the first models released after Kaweco became Gutberlet owned. Unless of course the reviewed set was a prototype for the Ranger series that was available in the 1990s.

A Prototype! The Kaweco AL Sport Stonewashed Pencil Read More »

Lamy 2000 mechanical pencil

9 Comments / Lamy, Mechanical pencils / 15 April 2016 / Lamy, Lamy 2000, Made in Germany

Welcome to my blog post about the Lamy 2000 mechanical pencil, which was provided for free by The Pen Company. This blog post has also been published on their blog.

50 years of the Lamy 2000

The Lamy 2000 was first released in 1966 so this year is its 50th anniversary – and after several special editions covering materials like grenadill wood, ceramic, titanium, and more, we can expect a new special edition in 2016. I went ahead and compiled a list of the special editions so far, which can be seen at the still unnamed pen wiki. I checked with the company that handles the launch of the 50 years Lamy 2000 special edition. They checked with Lamy and I was told that the list is complete. I wonder whether someone has all of them. Maybe the person who bought the Jonathan Ive and Marc Newson special edition in red?

The material

It’s still not clear how the special edition will look, but however it looks, the ‘normal’ edition is stunning in itself. The main body is made from Makrolon (polycarbonate) and the surface is brushed, which means that use over time will slowly start to polish the surface and it will become shinier. This reminds me very much of Lexikaliker’s ‘beauty through use’ post (Translation / Original). It is a beautiful concept and idea and just one of the things I love about the Lamy 2000.

The surface of the Lamy 2000 in the middle changed after years of use.

The Lamy 2000 Fountain pen

Even though I’ve been using Lamy (Safari) fountain pens since the 1980s, I only bought my first Lamy 2000 fountain pen in 2008. The most expensive fountain pen I had before that was probably a Parker, which was less than half the 2000’s price. Before I bought it I was looking at the 2000 pen for several months before I decided that it’s worth the €89.95(~$102; £72) it cost back then, and in the end I got this pen as a Christmas gift that year from my wife. It’s a great pen! After I got it, it was the only fountain pen I used for a very long time. One unusual thing about my 2000 fountain pen is the enormous ink flow you get if you start using a bit of force. The M nibbed one I have is like this, but I wouldn’t know whether all Lamy 2000 in M are like that. Well, I liked this pen so much that I bought an EF version a bit later, mainly because of the fairly big line variation I got from my version in M.

Lamy 2000 fountain pen and mechanical pencil

Even today, after Lamy has increased their prices a few times, they provide excellent value for money. You won’t find many piston fillers with a gold nib for the price the Lamy 2000 fountain pen sells for – and you’ll find even fewer fountain pens as handsome as the Lamy 2000, especially not for this price.

The Lamy 2000 mechanical pencil

Well, technically it’s not really the 50th anniversary of the Lamy 2000 mechanical pencil; even though the fountain pen was released in 1966 the mechanical pencil was only added in 1970 (and the ballpoint pen in 1968).

Despite loving wood-cased and mechanical pencils, and despite the good reviews out there, I hadn’t had the pleasure of using a Lamy 2000 mechanical pencil until I got one from The Pen Company in January 2016.

Vitals

My first impressions: the Lamy 2000 mechanical pencil was much lighter than expected. I know these numbers won’t mean much to most readers, but in case you want to compare it to another pen, here are the vitals: The length of the pen is just under 14cm, with the thickest part of the barrel having a diameter of 12mm. The weight is just under 19g. The centre of gravity is very much in the middle as you can see from the picture where the 2000 is balanced on a type.

Look and Feel

One of the other things I noticed first was that the Lamy 2000 pencil is much slimmer than the Lamy 2000 fountain pen version. As I was used to the thickness of the fountain pen version I did initially find the mechanical pencil too slim, but by now I like it the way it is. The clip has a similar design as the fountain pen, but again, is slimmer. This is a good thing as many users of mechanical pencils will rotate them in their hand, so a slimmer clip makes it less obtrusive when it rests on the purlicue between the thumb and index finger. You’ll still notice the clip in your hand though, because the corners are not rounded – the clip is still quite noticeable and can even be distracting.

If you write using a fairly acute angle, i.e. if you hold the pencil very flat, the pencil’s body can still be too wide, especially when writing near the spine in a notebook where the pages don’t lie flat. In that case, the body of the pen can touch the paper, making writing difficult – but this issue doesn’t usually occur.

The good thing about the cap is that it fits quite firmly on the pen and there is no danger of it falling off by mistake. I mention this because the cap of the my Caran d’Ache 844 is quite loose and can come off easily.

Speaking of the cap: the 5 on the cap seems to be laser etched, similar to what you get on some keyboards, so I don’t expect the 5 to rub off anytime soon.

Conclusion

This is a great mechanical pencil. I am sure I will enjoy it for many years to come. Since I got it, it has been my most used mechanical pencil.

The fountain pen and the mechanical pencil – easy to distinguish in your shirt pocket

Price: 2008

Exchange rates: April 2016

I would like to thank The PenCompany for providing this pen free of charge for this review.

You can find more about the origins of the Lamy 2000 design on the Fountain Pen Network.

Dave has a review of the Lamy 2000 mechanical pencil too.

If you like the Lamy 2000, have a look at the Lamy Scribble, as well.

Lamy 2000 mechanical pencil Read More »

Disappointed with the Kuru Toga – again

19 Comments / Mechanical pencils, Uni / 12 January 2016 / Kuru Toga, Made in Japan, mechanical pencil, Mitsubishi, sliding sleeve, Uni

Welcome to a blog post that is linked to my 2009 blog post about the Kuru Toga and is my third blog post this month about sliding sleeve pencils, after the M&G m9 and the 0.3mm Orenz.

If blog posts came with a soundtrack this post’s sound track would be Queen’s ‘Under pressure’, you’ll see why…

As mentioned previously there is a new Kuru Toga model that features a sliding sleeve – and I had to buy one. It’s from a Japanese seller on eBay and I paid $14.09 (~£9.75; €13.00) (sorry, no link to the product as the seller doesn’t sell it anymore).

About the ‘pipe’

I will call this model ‘pipe slide’ for now as there is no English version with an English name out yet and one of the only things I can read on the Japanese packaging is ‘pipe slide’ in Katakana. The name is slightly misleading as the sleeve is more of a cone than a pipe. Otherwise it looks pretty similar to the original Kuru Toga, with one of the more obvious differences being the black grip area, instead of the original silver one.

The idea, as with other sliding sleeve pencils, is that you can just keep writing without having to advance the lead – because the sleeve that protects the lead is sliding back further and further as you use the lead up …until you have used up the several millimetres of lead that where originally protected by the sleeve.

About the mechanism to rotate the lead

On my original Kuru Toga in 0.5mm you had to press the lead down 40 times to rotate the mechanism by 360°. The ‘pipe sleeve’ model, also 0.5mm works differently. Each pressing down of the lead will rotate the lead about twice as much as the original model, so pressing the lead down 20 times will rotate it by 360°.

Does it work?

…the sleeve

Well, the sliding sleeve works. It’s not as good as the one from the Pentel Orenz or the Staedtler Microfix S, because the sleeve is more likely to press into the paper, but it will work well.

When the sleeve is partly retracted the lead will feel a bit more wobbly, but it isn’t a problem at all. You will need about 0.05 N of pressure to slide the sleeve back, which is a pretty good value, but as mentioned earlier the sleeve is more in the way, so the writing experience you get from a pencil with similar pressure requirements, like the Microfix S, is better.

…the mechanism to rotate the lead

The mechanism still doesn’t work for me, just like the original Kuru Toga, six years ago. It does seem to work for others. This pencil is in the Pen Addict’s Top 5 and Brad wrote: “Not a gimmick either. It actually works.”, but I assume when writing he is using much more pressure than I do.

There seems to be a strange discrepancy here. Many people seem to prefer soft wood cased pencils, indicating that they might use less pressure than me when writing, but on the other hand many people seem happy with the Kuru Toga, indicating that they use more pressure than me when writing.

What is your experience with the Kuru Toga – and what kind of wood cased pencils do you prefer? I’d love to find out how they relate to each other for others.

You need quite a bit less force or pressure to rotate the lead of the pipe slide model, 0.3 N in my case, but that’s still more than I seem to normally use. Things get even worse when you write in cursive, as there’ll the lead will be lifted and placed on the paper less often, so there are fewer opportunities to rotate the lead anyway.

Maybe that’s the reason why my Kuru Toga pipe slide came with a reasonably hard lead ^[1]harder than the lead some other Japanese pencils I have came with, so that you press a bit harder.

Conclusion

It’s not a bad mechanical pencil, but unfortunately it is just not good at doing what is supposed to set it apart. I wonder whether Schmidt’s ^[2]Not related to Lexikaliker, I think. rotating lead apparatus would have worked any better, or Kotobuki’s mechanism…

Price and exchange rates: January 2016

Please open the images in a new tab/windows to see them at full resolution.

The video is available in full resolution on YouTube.

I have added the Kuru Toga Pipe slide to my sliding sleeve table.

Michael Fryda has a YouTube review of this pencil.

References[+]

References
↑1	harder than the lead some other Japanese pencils I have came with
↑2	Not related to Lexikaliker, I think.

Disappointed with the Kuru Toga – again Read More »

Pentel Orenz 0.3

1 Comment / Mechanical pencils, Pentel / 7 January 2016 / FuZhou road, Made in Japan, mechanical pencil, Microfix, Orenz, Pentel, Pentel Orenz, Shanghai, Staedtler, Staedtler Microfix

Another blog post about my stationery adventures in Shanghai.

Orenz #4

This time I want to show you another mechanical pencil I bought: The Orenz in 0.3.

This is my fourth Orenz now, but the first one in 0.3 mm. I guess you might say I’m overdoing it a bit, but it is a really nice pencil, so I couldn’t resist trying out the 0.3 mm version.

Expectations

When I bought it I had certain expectations.

Hypothesis 1: The 0.3 mm will need more force to slide the sleeve than the 0.2 mm version.

This is based the assumption that there is a bigger area of contact between lead and sleeve and between the sleeve and the rest of the body, which would result in more friction.

Hypothesis 2: The Orenz in 0.3 mm will need less force than the Staedtler Microfix S 0.5 to slide the sleeve.

This is based the assumption that there is a smaller area of contact between lead and sleeve and between the sleeve and the rest of the body, which would result in less friction.

Orenz 0.3 — The background is a tribute to Lexikaliker

Price and colour

I bought the black version for 50 元 (~$7.60; £5.20; €7) from Shanghai Jiajun Craft Gifts Co. Most stores on FuZHou Road charge 55 元, but one or two charged 50. I bought mine in one of the cheaper shops. Some of the Orenz in the shops had the Japanese packaging, some had the English packaging.

On the web I have seen a gorgeous dark green version of the Orenz, but I’ve only seen it online so far – it wasn’t available in any of the shops I visited, so in the end I bought the black version because I didn’t like pink and I already have the white and blue versioning 0.2 mm.

Well, I wasn’t keen on the black version when I bought it, but now I started to like it. With the right light the shiny black surface can look really good.

What about the sliding sleeve?

So what about the force needed to slide the sleeve.

Hypothesis 1 was correct. When I checked I had to use 1 dN – 2 dN to slide the sleeve, certainly much more than what is needed for the 0.2 mm version.

To my surprise Hypothesis 2 was not correct. I had to use more force to slide the sleeve of the Orenz in 0.3 mm compared to my Staedtler Microfix S 0.5 77305.

To qualify this point: Other Orenz and especially other Microfix might behave differently. Some leads might have a slightly different diameter than others, which might result in different numbers when testing the force needed. Plus: my Microfix was bought in the 1980s, Staedtler stopped selling them in 1988, so maybe it got better with time. On the other hand, maybe Staedtler just did a stellar job with the Microfix and created a sliding sleeve that is unsurpassed by modern pencils.

Other items I bought in the shop

Other items I bought in the shop include an Indonesian Castell 9000 and a 12B pencil from Lotory.

I have added the Orenz 0.3 to my sliding sleeve table.

Prices: December 2015

Exchange rates: January 2016

The background of the first photos is a tribute to Lexikaliker, who kindled my interest in the Orenz – just that my background isn’t a Tenugui, but a Furoshiki – in my case a non-woven wrapping sheet from Muji.

I have discussed the Indonesian version of the Castell 9000 in a previous blog post.

To see the Orenz in its full beauty please open the Orenz images (the first three) in a new tab/window.

Pentel Orenz 0.3 Read More »

M&G m9

1 Comment / M&G, Mechanical pencils / 6 January 2016 / FuZhou road, M&G, Made in China, mechanical pencil, Shanghai, sliding sleeve

One of the pencils I bought in Shanghai this Winter is the M&G m9, also known as the AMP85405.

Price and properties

When I saw it in a stationery store ^[1]I think it was 立信帐册, house number 618, even though according to Google it is somewhere else. on FuZhou Road, the book and stationery road I mentioned many times before, I just couldn’t resist. Only 15元 (~$2.30; $1.60; €2.10) for this quite handsome mechanical pencil. It is available in white, grey, red and black. It feels very well made, from some kind off metal, and with 12 g it is quite heavy for it’s size. The pen’s centre of gravity is in the middle.

Sliding sleeve

It does feature a sliding sleeve, but the ‘sleeve’ is shaped more like a cone than like a pipe. This means that it is not good at what I like sliding sleeves for, i.e. sliding back while you write so that you don’t have to keep advancing the lead manually, despite only needing 4 dN – 6 dN to slide the sleeve.

Conclusion

Great value for money, despite the sliding sleeve not doing its job properly. I think the m9 might benefit from its centre of gravity a bit closer to the front …and maybe from having a slightly larger diameter.

Price: December 2015

Exchange rates: January 2016

You can read about a wood-cased pencil from M&G in a previous blog post.

I have added the m9 to my sliding sleeve table.

References[+]

References
↑1	I think it was 立信帐册, house number 618, even though according to Google it is somewhere else.

M&G m9 Read More »