A Look at Pentel’s orenznero PP3002

In a recent blog post I introduced the new Pentel orenznero, also called PP3002, its model number (for the 0.2mm version).

As you probably know nero means black in Latin and Italian – and, surprise surprise, the orenznero is black. Nero is also oren, as in oren(z), spelt backwards. Pentel seems to try to emphasise this fact by not using capital letters and the o on both ends of orenznero is stylised as, what looks to me like, a lead in a pencil sleeve viewed from the top.

Thanks to Yumiko I got one just after it was released in Japan. Altogether I paid just over £30 (~$36;35).
Here are my observations regarding this pencil after a week of use.


Transporting this pencil

First off: transporting this pen.

You can’t make this pencil pocket safe very easily. It is possible to retract the sleeve, but you have to push the sleeve/pipe really hard into the body of the pen, for example with your fingernail.

It’s also not a great pen to transport in pen sleeves/pockets/slots [1]I am trying to clarify here as very different things are called a sleeve.. If you try to put this pencil in a pocket where the pencil’s sleeve or pipe will touch the material of the pen slot (think of something like the Nock Co Hightower)  the lead will forward and possibly break in your pen slot.

Materials used

The Orenznero looks beautiful. Especially on photos where you think it has something of the allure of the Rotring 800.

The Orenznero next to a Rotring 800

In reality, the Orenznero feels much cheaper. The body is made from plastic, but it is nice to touch plastic with a little bit of a texture.

The surface has a bit of a texture (enlarge picture to see)


The original Orenz is a great pencil. It felt as if Pentel revived an old friend of mine, the Staedtler Microfix.

Top to bottom: Staedtler Microfix, Pentel Orenz and Orenznero

In my previous blog post about the Orenznero, I talked about the history of the sliding sleeve pencil and about alternatives, including very cheap alternatives from Faber-Castell that cost less than a tenth of what I paid for the Orenznero.

Grip section to the left

Well, I have to say that the Orenznero feels, of course, better and is better made, but because the original or classic Orenz was so good I somehow expected that the Orenznero represents a quantum leap for auto advance pencils. This is not the case! It is, however, a nice pencil.

The Orenznero will work great is you hold it vertically, but if you write at an angle the sleeve will not glide back properly as it does with the classic Orenz, so if you don’t use light pressure when writing your graphite lines on the paper will get very thin or will even disappear as the sleeve will cover them. The force needed to slide the sleeve starts very low, like a classic Orenz, but the more the sleeve is pushed into the body the more pressure you need, in the end up to 0.3N.

A picture from an old blog post to illustrate this

Advancing the lead with a click and using the Orenznero like a normal pencil is not an option as it will advance too much of the 0.2mm lead – it would break. One thing to add, the Orenznero is very comfortable to write with hand has a nice centre of gravity in the front half.

You can see the centre of gravity where the pencil is balanced


It’s a nice pencil, but it requires a bit more pressure to write with. This is off putting in my case, as I am not so keen on pens that subconsciously make me change my writing habit (in this case to make me press harder when writing), something that might turn into the behaviour I use with other pens, too.

Just because it is such a nicely designed pencil I will use it a bit longer though, at least for now.

Mass-carved & Microfabbication??


1 I am trying to clarify here as very different things are called a sleeve.

6 thoughts on “A Look at Pentel’s orenznero PP3002”

  1. In response if the Pentel Orenz Nero is metal.
    “Yes, I was quite surprised though it’s not completely metal. The body is metal and resin composite together. The texture feels like high quality PBT plastic but it also packs some metal weight. Overall it was not too heavy and pretty unique. It looks like pentel was engineering a composite material for the perfect weight and balance for this pencil”

    Can you confirm or deny whether the body has metal in it?

  2. Redice, thank you for your comment.
    I wouldn’t know how to figure out whether this is a metal resin compound. I guess you’d need a material scientist and some equipment to do that. All I can say is that it feels like a very good plastic, not like cheap plastic at all.

  3. Made of ‘precious resin?’ Where have I heard that before? LOL Also, too bad to hear that the auto-feed is nothing special. Be great to compare it to the Pilot Automac pencil.

  4. Hi Matthias, long time no comment. I had the Orenz Nero 0.2 but it died after the finish of the first lead and trying to feed the next lead through the clutch. No dice, hours and hours, days and days, all possibilities checked. I decided to hand the mechanism over to my own scientific research, a very expensive fail. £25 down the drain. The body is on display in my “pencil sadness museum😪The clutch is not the three pronged affair that most are…the clutch on the orenz nero is shaped like 2 horizontally stretched letter ‘Z’s…looks weird and as far as I’m concerned a big step backwards for Pentel. I also have the 0.3 nero and so far has managed to co-operate, albeit still problems with the feed through this awful clutch. The classic orenz, while finicky is far more reliable than the nero.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.