Handicraft with Bleistift VII – the Lexikaliker/Pollux/Leather Case™

Time for another Handicraft with Bleistift post.

Pencil point protectors

Since we’re talking about Handicraft posts anyway, my 2010 Handicraft post contained the sentence “my point protector is so simple, you probably thought of it yourself somewhen in the past” – well, there’s proof that people come up with the same idea [1]…from the blog post’s point of view ‘somewhen in the future’, there’s a video on YouTube by tintinonair, explaining how to make these pencil point protectors.

Lexikaliker’s Pollux Case

You might have seen Lexikaliker’s posts about his Pollux cases, first in Basteln mit dem Lexikaliker (14), then a different version in Basteln mit dem Lexikaliker (15).

Well, I went with the more traditional, original version from Basteln… (14).

I have never worked with leather before and don’t have much DIY/craft experience or skills in this area, but Gunther’s drawing and measurements make it very easy to copy his design, which is similar to the leather case you get with the DUX Adjustable Brass Pencil Sharpener DX42774.

Me being inexperienced the whole thing took over an hour, but the time was mainly spent on trying to pull the needle through the holes, using the pliers from my Swiss Army Knife.

Doing the threads both ways, i.e. after sewing through the holes going through them in reverse again, so that the thread is also between two holes on the opposite side of the leather (I bet there’s a word for this) didn’t help speeding things up either.

Disrespecting my Blackwing

Well, I was well entertained, listening to our favourite Scouser’s (Craig Charles) House Party. By the way, Craig Charles previously featured in this blog post. While listening I once thought Arrested Development were singing ‘disrespecting my Blackwing’, but it turns out they were singing ‘disrespecting my black queen’.

Well, the main thing I learned, other than paying more attention to song lyrics, is to try to cut the leather deep enough the first time as the knife I used to cut the leather was so sharp, when cutting a second time the blade won’t end up in the old, but will cut a new ‘channel’.

One thing to do for next time is to get a smaller needle and thinner thread. When I compared the thread to the one on my Rustico I saw that mine is much thicker. With a thin thread and needle the whole ‘pull the needle with pliers, like an ox’ part could have been skipped.

I love the look of vegetable tanned leather and how it slowly changed colour over the years, getting much darker.

Colour comparison (Pollux case on top of a Rustico case) – look how dark my Rustico case darkened over time. I guess the Pollux case will follow soon

The leather cost me £2.25, but there’s enough left to make two more cases. As for the rivet.. unfortunately, I had to buy ten (for £5.49), so I hope I can find a use for the other nine.


I would like to thank Gunther from the Lexikaliker blog for his great plan on how to cut the leather for this case.

You can see the colour of my Rustico case, when it was new, in this blog post.

References

References
1 …from the blog post’s point of view ‘somewhen in the future’

3 thoughts on “Handicraft with Bleistift VII – the Lexikaliker/Pollux/Leather Case™”

  1. Great! And the rivet looks nice 🙂 I too like it when vegetable tanned leather darkens over the years.

  2. Gunther, thank you for your comment. I love veg tanned leather but am not so keen on those shiny leather with a reflective, plastic like surface.
    Now that you made me enjoy this I ordered some more leather to make something else.

  3. Pingback: Economical Links for 2017.06.23 – The Economical Penster

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.